Configure Operator Managed DDI's
DDI calls that an operator will handle have to be enabled for operator routing, this is done in:
Configure > Telephone System > PBX > Operator Console > Manage Operator Console DID's
Select 'Managed By Operator' for each DDI that the operator will handle.
The same can be done for trunks in: Configure > Telephone System > PBX > Operator Console >
Manage Operator Console Trunks. This allows Analogue trunks to be handled by the Operator.
Select 'Managed By Operator' for each Trunk that the operator will handle.
29 |
P a g e