Making Cross-References - ABB COM600 3.4 User Manual

1MRS756738
3.4.
Station Automation COM600 3.4
Logic Processor User's Manual
Figure 3.3.6-4 Logging out from the Device
Logic is still running on PLC device.

Making cross-references

After logging out from the device, you can close the CoDeSys programming environment
and launch the Cross References tool to build a cross-reference between the COM600
communication structure and Logic Processor variables.
To make cross-references:
1. In SAB600, right-click on Logic Processor IED and select Cross References.
2. The Cross References tool reads all the symbols defined in Logic Processor.
Logout_from_device.bmp
27