Table of Contents
Advertisement
1MRS756738
Station Automation COM600 3.4
Logic Processor User's Manual
Figure 4.9-2 Cross references tool
6.
From the data attribute drop-down list, select 'ctlOperOff' to map 'brk1Trip'. Click
Apply to confirm the change in the table.
The control signal is sending from the PLC logic to IED, so click the Direction field
and make it point to the left <-.
Figure 4.9-3 Cross-references with all variables
7.
After completing the configuration of cross reference, click Apply to save the setting,
and close the Cross References tool.
Editor_Row.bmp
Cross_reference_all_variables.bmp
43
Advertisement
Table of Contents
