1MRS756738
4.3.
Station Automation COM600 3.4
Logic Processor User's Manual
Figure 4.2-1 Configuring IEDs on SAB600
4.
In breaker 1 IED, add a logic node Brk1CSWI1.
a.
Add one DPC data object (Pos) to read and control the switch.
b.
Add one SPS data object (Reset) to read Reset signal.
5.
In breaker 2 IED, add a logic node Brk2CSWI1.
a.
Add one DPC data object (Pos) to read and control the switch.
b.
Add one SPS data object (BreakFailure) to read break failure signal.
6.
In breaker 3 IED, add a logic node Brk3CSWI1.
a.
Add one DPC data object (Pos) to read and control the switch.
Adding Logic Processor IED
To add a Logic Processor IED:
1.
In SAB600, under Gateway, add Logic Processor OPC Server.
2.
Under Logic Processor OPC Server, add Logic Processor Subnetwork.
3.
Add Logic Processor IED.
Configuring_IEDs.bmp
33