3.
3.1.
3.2.
14
Station Automation COM600 3.4
Logic Processor User's Manual
Configuration
Overview of configuring Logic Processor
The prerequisite is to have knowledge about logic programming and IEC 61131-3
standard.
Also, CoDeSys V3.2 SP2 must be installed to be able to use the Logic Editor in SAB600.
For information about CoDeSys V3.2 SP2 installation, see COM600 User's Manual.
Before starting to configure the Logic Processor, it is necessary that the process commu-
nication has been configured.
The Logic Processor configuration in COM600 can be divided into the following tasks:
1. Building Communication Structure objects for the Logic Processor.
2. Creating the logic in the CoDeSys programming environment.
3. Building a cross-reference between process data and logic variables data by using
the Cross-References tool.
4. Creating virtual data objects in the Logic Processor OPC server and connecting the
data objects to logic variables with the object properties.
Building communication structure objects
To build the communication structure:
1. Add the Logic Processor OPC Server object in the Communication structure by
selecting the Gateway object.
2. Right-click the Gateway object and select New > Logic Processor OPC Server.
3. Select a Logic Processor OPC Server object and right-click it.
4. Add a Logic Processor Subnetwork object.
5. Select a Logic Processor Subnetwork object and right-click it.
6. Add a Logic Processor IED object.
1MRS756738