Siemens SITOP UPS1600 Manual page 106

Engineering and remote access
3.5 Cyclic and acyclic data
Data
Valid configuration
Number of batteries
Fill byte(s)
Battery 1 change recommended
Battery 2 change recommended
Battery 3 change recommended
Battery 4 change recommended
Battery 5 change recommended
Battery 6 change recommended
Battery 1 Connection Fault
Battery 2 Connection Fault
Battery 3 Connection Fault
Battery 4 Connection Fault
Battery 5 Connection Fault
Battery 6 Connection Fault
Battery 1 temperature [1 °C]
Battery 2 temperature [1 °C]
Battery 3 temperature [1 °C]
Battery 4 temperature [1 °C]
Battery 5 temperature [1 °C]
Battery 6 temperature [1 °C]
Device temperature [1 °C]
LED pattern
Object structure LED pattern
1)
106
Description
Valid configuration: Indicates whether the software parameters or
the parameters at the rotary switches are used. The corresponding
setting should be made at the rotary switch for the buffer thresh-
old.
Number of connected battery modules. Here, only the
SITOP UPS1100 battery modules (coded batteries) are counted.
-
Battery 1: Battery replacement recommended: The battery capaci-
ty is not sufficient for the defined buffer time.
Battery 2: Battery replacement recommended: The battery capaci-
ty is not sufficient for the defined buffer time.
Battery 3: Battery replacement recommended: The battery capaci-
ty is not sufficient for the defined buffer time.
Battery 4: Battery replacement recommended: The battery capaci-
ty is not sufficient for the defined buffer time.
Battery 5: Battery replacement recommended: The battery capaci-
ty is not sufficient for the defined buffer time.
Battery 6: Battery replacement recommended: The battery capaci-
ty is not sufficient for the defined buffer time.
Battery1: Connection fault
Battery 2: Connection fault
Battery 3: Connection fault
Battery 4: Connection fault
Battery 5: Connection fault
Battery 6: Connection fault
Battery 1: Battery temperature
Battery 2: Battery temperature
Battery 3: Battery temperature
Battery 4: Battery temperature
Battery 5: Battery temperature
Battery 6: Battery temperature
Temperature in the housing
Status of LEDs 1 to 4 for the SITOP UPS1600
Data type
Unsigned8
Unsigned8
7 x Unsigned8
Unsigned8
Unsigned8
Unsigned8
Unsigned8
Unsigned8
Unsigned8
Unsigned8
Unsigned8
Unsigned8
Unsigned8
Unsigned8
Unsigned8
Integer8
Integer8
Integer8
Integer8
Integer8
Integer8
Integer8
Unsigned8
1)
SITOP UPS1600 / UPS1100
Manual, 04.2017, A5E37775406-8-76