5.1.2
USB connector
For deployment in an explosion-endangered environment, a USB connector with strain relief
must be used.
Mounting
Push the connector onto the socket in the housing until the strain relief (6b) snaps into the
housing (6a).
Removal
To remove the USB connector, press to release the strain relief (6b) (see Figure 5-3
Mounting/removal: USB connector (Page 189)) and then remove the connector.
Figure 5-3
SITOP UPS1600 / UPS1100
Manual, 04.2017, A5E37775406-8-76
Mounting/removal: USB connector
Mounting/removing
5.1 SITOP UPS1600
189