Siemens SITOP UPS1600 Manual page 27

Changes are also effective in the buffer mode.
Table 2- 1
Rotary coding
OFF, 0,5 - MAX
OFF, 0,5 - MAX
Table 2- 2
Rotary coding
OFF, 0,5 - MAX
OFF, 0,5 - MAX
Table 2- 3
Rotary coding
SITOP UPS1600 / UPS1100
Manual, 04.2017, A5E37775406-8-76
With interface (up to firmware release less than V1.20)
Rotary coding
switch, switch,
buffer time connection thresh-
OFF 21 - 25
0,5 - MAX 21 - 25
21 - 25
REN
With interface (from firmware release V1.20 up to V2.0.x)
Rotary coding
switch, switch,
buffer time connection thresh-
OFF 21 - 25
0,5 - MAX 21 - 25
21 - 25, REN
REN
With interface (from firmware release V2.1)
Rotary coding
switch switch
buffer time switch-in threshold
OFF 21 - 25
0,5 - MAX 21 - 25
0,5 - MAX 21 - 25
OFF, 21 - 25 REN
0,5 - MAX
Description, device design, dimension drawing
Wire jumper
ON/OFF with respect to -
old
Not relevant
Wire jumper
ON/OFF with respect to -
old
Wire jumper
ON/OFF with respect to -
2.3 Operator controls
Yes Buffering not permitted
Yes Buffer mode permitted
(buffer time corresponding
to the settings or maxi-
mum buffer time)
No Buffering not permitted
The software settings
apply
Yes Buffering not permitted
Yes Buffer mode permitted
(buffer time corresponding
to the settings or maxi-
mum buffer time)
No Buffering not permitted
Yes The software settings
apply
Yes Buffering not permitted
No Buffering not permitted
Yes Buffer mode permitted
(buffer time corresponding
to the settings or maxi-
mum buffer time)
No Buffering not permitted
Result
Result
Result
27