Siemens sitrans LR 400 Instruction Manual page 26

Example 2: Change the filling speed from 2.0 cm/min to 100 cm/min.
Access the Fill speed parameter from the multi-display according to instructions on
page 20.
The default setting appears in the display.
Enable the programming by pressing RIGHT
.
The second segment of the second
display line flashes.
Set the digit to 1 with
Select the decimal point with RIGHT
Press UP twice so that two other places
appear in front of the decimal point.
Select the last decimal place with RIGHT
End the input with RIGHT
7ML19985JC02
DOWN .
.
(ENTER).
SITRANS LR 400 (Solids) – INSTRUCTION MANUAL
.
Page 23