Siemens sitrans LR 400 Instruction Manual page 49

The 4.2.5.8: Calculate parameter requires the following parameters:
4.2.5.8.1: Tank Design (F = Vertical Cylinder)
Value
Enter the external form of your vessel. You can choose from:
• Linear (any form with vertical walls and a flat floor)
• Vertical cylinder (vertically standing cylindrical form with curved covers)
• Horizontal cylinder (horizontal cylindrical form with curved caps)
• Sphere
4.2.5.8.2: Bottom Design (F = Dished end)
Value
Enter the form of the two vessel cover caps. You can choose from:
• Dished (according to DIN 28011)
• Basket (according to DIN 28013)
• Bullet (hemispherical shaped floor)
4.2.5.8.3: Tank volume (F = 20 m
Value
4.2.5.8.4: Tank height (F = 20 m)
Value
4.2.6: Mass Parameters (for qualified personnel only)
Mass parameters 4.2.6. 1 to 4.2.6.9 are for Factory Authorized Personnel only.
4.2.6.1: Mass URV (for qualified personnel only)
4.2.6.2: Mass LRV (for qualified personnel only)
4.2.6.3: Mass Damping (for qualified personnel only)
4.2.6.4: MinLim Mass (for qualified personnel only)
4.2.6.5: MaxLim Mass (for qualified personnel only)
4.2.6.6: HYST Mass (for qualified personnel only)
Page 46 SITRANS LR 400 (Solids) – INSTRUCTION MANUAL
Linear
Vertical cylinder
Horizontal cylinder
Sphere
Dished end
Basket end
Bullet bottom
numerical value
numerical value
3
)
7ML19985JC02