Siemens sitrans LR 400 Instruction Manual page 46

4.2.5: Volume Parameters
To calculate the volume of the measuring medium, you need the level parameters
(Parameter 4.2.4) in the units selected according to Parameter 4.1.1 and tank characteristic
(Parameter 4.2.5.7).
4.2.5.1: Volume URV (F = 20 m
Full scale of volume
Value
4.2.5.2: Volume LRV (F = 0 m
Empty scale of volume
Value
4.2.5.3: Volume Damping (F = 1 s)
Damping of volume
Value
4.2.5.4: MinLim Volume (F = 0 m
Lower limit value of volume
Value
4.2.5.5: MaxLim Volume (F = 20 m
Upper limit value of volume
Value
4.2.5.6: HYST Volume (F = 0.5 m
Hysteresis of the volume limit values
Value
4.2.5.7: Tank Characteristic (F = Calculate)
Determining the vessel characteristic
Value
7ML19985JC02
numerical value
3
)
numerical value
numerical value
numerical value
numerical value
numerical value
Calibrate/table
Calculate
SITRANS LR 400 (Solids) – INSTRUCTION MANUAL
3
)
3
)
3
)
3
)
Page 43