Remote Alarm Terminal - Sanyo MCO-18AIC Service Manual

INCUBATOR COMPONENTS

Remote alarm terminal

The remote alarm terminal is located at the rear right side.
The remote alarm terminal is a contact output.
Normal
Abnormal
Contact capacity
Note:
• When the power switch is OFF or the power failure condition, the contact output is CLOSE.
• The remote alarm cannot be silenced by pressing the alarm buzzer stop key (BUZZER) since the
remote alarm is not conjunct with the BUZZER key
Remote alarm terminal
: OPEN
: CLOSE
: DC 30V, 2A
REMOTE ALARM
MAX DC30V 2A
Remote alarm terminal
N. O.
59
13