Panasonic AU-EVA1 Manual page 90

6. Appendix
6-5. Troubleshoot (INVALID error message)
Following tables show major causes and ways to cope with "INVALID" error message.
When occurred?
Pressed a user button,
SLOT SEL function
assigned.
Called center marker
or frame marker.
Pressed a user button,
SPOT METER
function assigned.
Pressed a user button,
LEVEL GAUGE
function assigned.
Pressed a user button,
Waveform monitor
display function
assigned.
Pressed a user button,
ZEBRA indicator
assigned.
Pressed a user button,
PEAKING focus assist
assigned.
Pressed a user button,
FOCUS SQUARE
focus assist assigned.
Pressed a user button,
EXPAND (Image
magnification) focus
assist assigned.
Pressed a user button,
LEVEL GAUGE SET
(setting of current
horizontal and vertical
position as the
reference point for the
level gauge) assigned.
Cause
SD card being mounted is just one.
Need two cards to perform SLOT
SEL.
SIMUL record mode is being turned
ON.
The card to be moved is not
recordable.
The EVA1 is currently recording (on
built-in recorder and/or external
recorder connected via SDI, HDMI.
PRE REC is under ON (or OFF)
process.
SDI RAW output mode is being
turned ON.
FOCUS SQUARE focus assist is
being turned ON.
EXPAND focus assist I being turned
ON.
COLOR BARS is being turned ON.
LCD CLEAN VIEW is being turned
ON.
EXPAND focus assist I being turned
ON.
COLOR BARS is being turned ON.
EXPAND focus assist I being turned
ON.
COLOR BARS is being turned ON.
LCD CLEAN VIEW is being turned
ON.
FOCUS SQUARE focus assist is
being turned ON.
EXPAND focus assist I being turned
ON.
LCD CLEAN VIEW is being turned
ON.
FOCUS SQUARE focus assist is
being turned ON.
COLOR BARS is being turned ON.
COLOR BARS is being turned ON.
COLOR BARS is being turned ON.
COLOR BARS is being turned ON.
LEVEL GAUGE is not yet turned ON
EXPAND focus assist I being turned
ON.
COLOR BARS is being turned ON.
LCD CLEAN VIEW is being turned
ON.
Mount one more SD card.
REC CHECK function does not work while SIMUL mode is
working.
Set REC SETTINGS > 2 SLOTS FUNC. > RELAY REC to
cancel the SIMUL mode.
Mount recordable SD card.
The function cannot be turned ON/OFF while recording. Stop
recording and try again.
Wait until the change process finishes.
Set SYSTEM SETTINGS > SYSTEM MODE >SDI RAW > OFF
Turn OFF the function with the USER button SQUARES F.A.
assigned.
Turn OFF the function with the USER button EXPAND
assigned.
Turn OFF "COLOR BARS" with a user button.
Turn OFF the function with the USER button LCD CLEAN
VIEW assigned.
Turn OFF the function with the USER button EXPAND
assigned.
Turn OFF "COLOR BARS" with a user button.
Turn OFF the function with the USER button EXPAND
assigned.
Turn OFF "COLOR BARS" with a user button.
Turn OFF the function with the USER button LCD CLEAN
VIEW assigned.
Turn OFF the function with the USER button SQUARES F.A.
assigned.
Turn OFF the function with the USER button EXPAND
assigned.
Turn OFF the function with the USER button LCD CLEAN
VIEW assigned.
Turn OFF the function with the USER button SQUARES F.A.
assigned.
Turn OFF "COLOR BARS" with a user button.
Turn OFF "COLOR BARS" with a user button.
Turn OFF "COLOR BARS" with a user button.
Turn OFF "COLOR BARS" with a user button.
Turn ON the function with USER button LEVEL GAUGE
assigned or set OUTPUT SETTINGS > LCD LEVEL GAUGE >
LEVELGAUGE > ON.
Turn OFF the function with the USER button EXPAND
assigned.
Turn OFF "COLOR BARS" with a user button.
Turn OFF the function with the USER button LCD CLEAN
VIEW assigned.
90
Remedy