Panasonic AU-EVA1 Manual page 91

6. Appendix
6-5. Troubleshoot (INVALID error message)
Following tables show major causes and ways to cope with "INVALID" error message.
When occurred?
Tapped the LCD
screen to set SDI OUT
color to "V-Log" (or
"V-709"). See P.13 for
the details.
Tapped the LCD
screen to set HDMI
OUT color to "V-Log"
(or "V-709"). See P. 13
for the details.
Tapped the LCD
screen to set LCD
OUT color to "V-Log"
(or "V-709"). See P. 13
for the details.
Pressed a user button,
Color bars assigned.
Pressed a user button,
OPEN IRIS FOCUS
ASSIST assigned.
Pressed a user
assignable dial to turn
ON/OFF variable
frame rate (VFR)
function.
Cause
MAIN COLOR setting is NOT set to
V-Log.
SDI RAW output mode is being
turned ON.
MAIN COLOR setting is NOT set to
V-Log.
MAIN COLOR setting is NOT set to
V-Log.
SDI RAW output mode is being
turned ON.
The EVA1 is currently recording (on
built-in recorder and/or external
recorder connected via SDI, HDMI.
The EVA1 is currently recording (on
built-in recorder and/or external
recorder connected via SDI, HDMI.
Record format is being set to one of
the AVCHD formats.
Record format is being set to
interlace format (59.94i or 50i).
Set SYSTEM SETTINGS > COLOR SETTINGS > MAIN >
V-Log.
Set SYSTEM SETTINGS > SYSTEM MODE >SDI RAW > OFF
Set SYSTEM SETTINGS > COLOR SETTINGS > MAIN >
V-Log.
Set SYSTEM SETTINGS > COLOR SETTINGS > MAIN >
V-Log.
Set SYSTEM SETTINGS > SYSTEM MODE >SDI RAW > OFF
The function cannot be turned ON/OFF while recording. Stop
recording and try again.
The VFR function cannot be turned ON/OFF while recording.
Stop recording and try again.
Set SYSTEM SETTINGS > SYSTEM MODE > MAIN CODEC >
"any format" except for AVCHD PS, AVCHD PH, AVCHD HA,
AVCHD PM.
Set SYSTEM SETTINGS > SYSTEM MODE > FREQUENCY >
any progressive format.
91
Remedy