The "Rssi" Tab - Siemens SIMATIC Ident Operating Manual
Hide thumbs
Also See for SIMATIC Ident:
- System manual (362 pages) ,
- Function manual (142 pages) ,
- Operating instructions manual (58 pages)
Table of Contents
Advertisement
Operating the software
5.3 The tabs of the RF640R/RF670R readers
5.3.4
The "RSSI" tab
With the "RSSI" tab (Received Signal Strength Indikator) you can display the strength of the
received antenna signal and, if necessary, optimize the antenna alignment or transponder
position/distance. To allow optimum adaptation of the antenna, the RSSI values of the
transponders read by the reader are updated cyclically. The RSSI value indicates the signal
strength with which a transponder was recognized.
You will find further information on adapting the environmental conditions and the RSSI
value in "RF600 system manual
(http://support.automation.siemens.com/WW/view/en/22437600)".
Figure 5-4
From the drop-down list, you can select the data source with which the recording will be
made.
38
The "RSSI" tab
Operating Manual, 09/2012, C79000-G8976-C292-01
SIMATIC RF-DIAG
Advertisement
Table of Contents
