Huawei ETP4830-A1 User Manual page 45

ETP4830-A1 Embedded Power
User Manual
Step 2 Set the IP address, subnet mask, and gateway address on the SMU's LCD.
Table 6-11 IP parameters
Main Menu
Quick Settings
----End
Setting Parameters Before Using NetEco
Before you use the NetEco to perform remote management, set the required parameters.
Procedure
Step 1 Apply to the site or equipment room network administrator for a fixed IP address.
Step 2 Set IP Address, Subnet Mask, and Gateway on the SMU's LCD.
Table 6-12 IP parameters
Main Menu
Quick Settings
Issue 10 (2017-08-08)
Second-Level
Menu
IP Address
Subnet mask
Gateway
Second-Level
Menu
IP Address
Subnet Mask
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Default Value
192.168.0.10
255.255.255.0
192.168.0.1
Default Value
192.168.0.10
255.255.255.0
6 Commissioning
Settings
Set this parameter
according to the
address assigned by
the network
administrator.
Set this parameter
according to the
address assigned by
the network
administrator.
Set this parameter
according to the
address assigned by
the network
administrator.
Settings
Set this parameter
according to the
address assigned by
the network
administrator.
Set this parameter
according to the
address assigned by
the network
administrator.
37