Installing Components; Installing An Smu; Installing A Rectifier - Huawei ETP4830-A1 User Manual

ETP4830-A1 Embedded Power
User Manual

4.2 Installing Components

4.2.1 Installing an SMU

Procedure
Step 1 Push the locking latch towards the left, and pull out the handle.
Step 2 Slide the SMU into the subrack along the guide rail, push in the handle, and then push the
locking latch towards the right.
Figure 4-2 Installing an SMU
----End

4.2.2 Installing a Rectifier

Procedure
Step 1 Push the locking latch towards the left.
Step 2 Draw the handle downwards.
Step 3 Insert the rectifier into the slot and slide the rectifier into the subrack along the guide rails.
Step 4 Push the handle upwards.
Step 5 Push the locking latch towards the right to secure the handle.
Figure 4-3 Installing a rectifier
----End
Issue 10 (2017-08-08) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Installation
23