Siemens SIMATIC S7-1500 System Manual page 163

Procedure for entering maintenance data via STEP 7
STEP 7 assigns a default module name. You can enter the following information:
● Plant designation (I&M 1)
● Location identifier (I&M 1)
● Installation date (I&M 2)
● Additional information (I&M 3)
To enter maintenance data via STEP 7, follow these steps:
1. In the device view of STEP 7, select the CPU/interface module or a module.
2. In the properties under "General" select the "Identification & Maintenance" area, and
enter the data.
During the loading of the hardware configuration, the maintenance data (I&M 1, 2, 3) are
also loaded.
Procedure for reading I&M data via the Web server
The procedure is described in detail in the Web server Function Manual
(http://support.automation.siemens.com/WW/view/en/59193560).
Automation system
System Manual, 12/2014, A5E03461182-AC
10.7 Identification and maintenance data
Commissioning
163