Sas Port Leds - HP 3PAR StoreServ 7000 Service Manual

Figure 20 FC port LEDs
Table 7 FC port LEDs
Callout
FP- 1 /FP-2

SAS Port LEDs

The controller node has two SAS ports and each includes four LEDs, numbered 0–3:
Figure 21 SAS port LEDs
LED Appearance
1 and 2 No light
Port speed (Amber) 1 Amber light off
Amber (3 blinks
per second)
Amber (4 blinks
per second)
Link status (Green) 2 Steady green light
2-3 blinks per
second
Indicates
Wake up failure (dead device) or power is not applied
Not connected
Connected at 4 Gb/sec.
Connected at 8 Gb/sec.
Normal/Connected – link up.
Link down or not connected
Controller Node and Internal Component LEDs 23