Connections Setup; Lan; Ipv4 - D-Link DAP-1610 User Manual

DAP-1610 AC1200 Wi-Fi Range Extender
User Manual

Connections Setup

In this menu you can configure basic parameters of the extender for operation in the local network.

LAN

To configure the extender's basic parameters, go to the Connections Setup / LAN page.

IPv4

Go to the IPv4 tab to change IPv4 address and configure the built-in DHCP server.
Figure 33. Configuring the local interface. The IPv4 tab. The Local IP Address section.
Parameter
Mode of local IP
address assignment
IP address
Subnet mask
Gateway IP address
Device domain name
When needed settings are configured, click the APPLY button.
Local IP Address
Select the needed value from the drop-down list.
Static: the IP address, subnet mask, and the gateway IP address are
assigned manually.
Dynamic: the extender automatically obtains these parameters from
the LAN DHCP server or from the router to which it connects.
The IP address of the extender in the local subnet. By default, the
following value is specified: 192.168.0.50.
The mask of the local subnet. By default, the following value is
specified: 255.255.255.0.
The gateway IP address which is used by the extender to connect to
the Internet (e.g., for synchronizing the system time with an NTP
server). Optional.
The name of the device assigned to its IP address in the local subnet.
Page 38 of 91
Configuring via Web-based Interface
Description