Log - D-Link DAP-1610 User Manual

DAP-1610 AC1200 Wi-Fi Range Extender
User Manual

Log

On the System / Log page, you can set the system log options and configure sending the system
log to a remote host.
To enable logging of the system events, go to the Settings tab and move the Enable switch to the
right. Then specify the needed parameters.
Parameter
Type
Level
Server
Port
After specifying the needed parameters, click the APPLY button.
Figure 60. The System / Log page. The Settings tab.
Select a type of logging from the drop-down list.
Local: the system log is stored in the extender's memory.
•
When this value is selected, the Server and Port fields are
not displayed.
Remote: the system log is sent to the remote host specified in
•
the Server field.
Local and remote: the system log is stored in the extender's
•
memory and sent to the remote host specified in the Server
field.
Select a type of messages and alerts/notifications to be logged.
The IP or URL address of the host from the local or global network,
to which the system log will be sent.
A port of the host specified in the Server field. By default, the value
514 is specified.
Page 79 of 91
Configuring via Web-based Interface
Description