Wps - D-Link DAP-1610 User Manual

DAP-1610 AC1200 Wi-Fi Range Extender
User Manual

WPS

On the Wi-Fi / WPS page, you can enable the function for configuration of the WLAN and select a
method for connection to the WLAN.
The WPS function helps to configure the protected wireless network automatically. Devices
connecting to the wireless network via the WPS function must support the WPS function.
!
The WPS function allows adding devices only to the basic wireless network of the
extender .
Before using the function you need to configure one of the following authentication types:
!
Open with no encryption, WPA-PSK or WPA2-PSK with the AES encryption method,
WPA-PSK/WPA2-PSK mixed with the AES or TKIP+AES encryption method. When
other security settings are specified, controls of the WPS page are not available .
To activate the WPS function, on the tab of the relevant band, click the ENABLE WPS button.
Figure 44. The page for configuring the WPS function.
Page 51 of 91
Configuring via Web-based Interface