Ipv6 - D-Link DAP-1610 User Manual

DAP-1610 AC1200 Wi-Fi Range Extender
User Manual

IPv6

Go to the IPv6 tab to change IPv6 address of the extender and configure IPv6 addresses assignment
settings.
Figure 36. Configuring the local interface. The IPv6 tab. The Local IPv6 Address section.
Parameter
Mode of local IPv6
address assignment
IPv6 address
Prefix
Gateway IPv6 address
When all needed settings are configured, click the APPLY button.
Local IPv6 Address
Select the needed value from the drop-down list.
Static: an IPv6 address and a prefix are specified manually.
Dynamic: the extender requests a prefix to configure an IPv6
address from a delegating router.
The IPv6 address of the extender in the local subnet. By default, the
following value is specified: fd01::50. The field is available for
editing, if the Static value is selected from the Mode of local
IPv6 address assignment drop-down list.
The length of the prefix subnet. By default, the value 64 is
specified. The field is available for editing, if the Static value is
selected from the Mode of local IPv6 address assignment
drop-down list.
The gateway IPv6 address which is used by the extender to connect
to the Internet (e.g., for synchronizing the system time with an NTP
server). Optional.
Page 41 of 91
Configuring via Web-based Interface
Description