Product Symbols; Product Recycling And Disposal (Europe Only); Restriction Of Hazardous Substances (Rohs) - ABB Aztec ADS430 EZCLEAN Operating Instructions Manual

Compressed air supply unit
Table of Contents

Advertisement

1.5 Product symbols

Symbols that appear on this product are shown below:
Functional earth (ground) terminal.
Direct current supply only.
This symbol, when noted on a product, indicates a
potential hazard which could cause serious personal
injury and / or death.
The user should reference this instruction manual for
operation and / or safety information.
This symbol identifies a risk of chemical harm and
indicates that only individuals qualified and trained to
work with chemicals should handle chemicals or
perform maintenance on chemical delivery systems
associated with the equipment.
This symbol indicates the need for protective eye wear.
This symbol indicates the need for protective hand
wear.
Recycle separately from general waste under the
WEEE directive.
4
OI/ADS430/EZCLN–EN Rev. B | Aztec ADS430 EZCLEAN | Compressed air supply unit

1.6 Product recycling and disposal (Europe only)

Electrical equipment marked with this symbol may not
be disposed of in European public disposal systems
after 12 August 2005. To conform to European local
and national regulations (EU Directive 2002/96/EC),
European electrical equipment users must now return
old or end-of-life equipment to the manufacturer for
disposal at no charge to the user.
ABB is committed to ensuring that the risk of any
environmental damage or pollution caused by any of its
products is minimized as far as possible.
IMPORTANT (NOTE) For return for recycling, please
contact the equipment manufacturer or supplier for
instructions on how to return end-of-life equipment for
proper disposal.

1.7 Restriction of Hazardous Substances (RoHS)

The European Union RoHS Directive and subsequent
regulations introduced in member states and other
countries limits the use of six hazardous substances
used in the manufacturing of electrical and electronic
equipment. Currently, monitoring and control monitors
do not fall within the scope of the RoHS Directive,
however ABB has taken the decision to adopt the
recommendations in the Directive as the target for all
future product design and component purchasing.

Advertisement

Table of Contents
loading

Table of Contents