HP 35601A Operating And Service Manual page 18

Installation Model 35601A
2-8. Mounting
The -hp- 35601 was installed into the -hp- 3047A with support rails, rack mount flanges, and
rear frame brackets. When mounting this instrument into the -hp- 3047A after servicing
these parts should be used. These are illustrated in Figure 2-4.
Rack Mount Flanges (two required)
-hp- part number 5020-8862
2680-0106
10/32 SCREWS
3050-0007
METAL WASHERS
3050-0248
NYLON WASHERS
2510-0193
8/32 PANHEAD
Rear Frame Mounting Bracket
-hp- part number 03047-04702
Instrument Support Rails (two required)
-hp- part number 03047-04701
Figure 2-4. Mounting Hardware