Replacing The Fan (R8) - ABB ACS800-U4 Hardware Manual
Drive modules (90 to 500 kw)
drive modules (125 to 600 hp)
Hide thumbs
Also See for ACS800-U4:
- Hardware manual (144 pages) ,
- Firmware manual (214 pages) ,
- Cabinet installation and operating instruction (162 pages)
Table of Contents
Advertisement
Replacing the fan (R8)
1. Remove the front cover.
2. Disconnect the fan capacitor and power supply wires. Renew the starting
capacitor.
3. Undo the red fastening screws of the plastic side cover of the fan. Shift the cover
to the right to free its right-hand edge and lift the cover off.
4. Undo the red fastening screws of the fan.
5. Lift the fan out of the cabinet.
3
3
Install the fan in reverse order to the above.
2
5
4
4
Maintenance
81
Advertisement
Table of Contents
