Installing Two Rus - Huawei DBS3900 Installation Manual

RRU3260
Installation Guide
Figure 8-7 Securing the captive screw into the connection hole
----End

8.2.2 Installing Two RUs

This section describes the procedure and precautions for installing two RUs on a pole.
Prerequisites
The hoist clamp on the main bracket is secured properly.


Procedure
Step 1 Install the first RU onto the main bracket, as shown in
Installing a Single
Issue 05 (2014-06-30)
Do not stand the RU upright because the RF ports cannot support the weight of the RU.
Place a foam pad or cardboard under the RU to protect the RU housing from damage
during the installation.
RU.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Installing the RU
Figure 8-8. For details, see 8.2.1
51