Troubleshooting - Silvercrest SSTB 10 B2 Operating Instructions And Safety Instructions

Troubleshooting

This section contains important information on fault identification and rectification . The fol-
lowing table will help to identify and rectify minor faults:
Fault
The device will not
switch on .
No sound .
The Bluetooth
®
connection cannot be
established .
■ 14 │ GB │ IE │ NI
Possible cause
The mains adapter is
not connected .
The socket is not supply-
ing any power .
The volume on the device
or the playback device is
set to minimum .
Playback has not been
started on the playback
device .
You have selected the
incorrect operating
mode .
Bluetooth
is not
®
activated on the play-
back device .
It is possible that not all
of Bluetooth
® devices
are compatible .
The playback device
is not paired with the
device .
The distance between
the device and the
playback device is
too great .
Bluetooth
operation
®
is deactivated on the
speaker .
remedy
Connect the mains adapter correctly .
Check the house's mains fuse .
Increase the volume on the device or
on the playback device .
Start playback on the playback
device .
Check whether the correct operating
mode (AUX or Bluetooth
been set .
Switch on Bluetooth
playback device . Please refer to its
operating instructions for more infor-
mation .
Check the settings on your
Bluetooth
® device .
Pair the devices again (see chapter
Pairing the device with a
Bluetooth
® playback device) .
Ensure that the device is no more than
10 metres away from the playback
device .
Press the button on the remote
control or press the
on the device to switch on the
ton
function .
Bluetooth
®
® ) has
® on your
/ FUNC. but-
SSTB 10 B2