Operation And Example Procedures - GE K0470 User Manual

3 Operation
3.4

Operation and Example Procedures

Introduction
Before operation, the instrument must be connected to the correct electrical and pneumatic/
hydraulic) supplies, (Ref: Installation,Section 2).
When the instrument is switched ON the display shows measured pressure mode and the task set
before the power-off.
Measure Mode
The instrument works as a precision pressure indicator and shows the pressure measured at the
output port.
Pressing Task enables pre-determined functions:
Task
Task
Basic
Airfield
Option refer to data sheet
Selecting a task exits the menu and
changes the display to the task
selected.
The display shows the task screen (Ref: Illustration above).
When selected, e.g. Basic, the screen changes to show the selected task.
To measure pressure in the task proceed as follows:
1. Select the required units of pressure measurement from the measure set-up menu.
K0470 Revision A
Return to home.
Exit set-up.
3 - 8 [EN] English