Huawei Quidway Eudemon 200 Installation Manual page 43

Installation Manual
Quidway Eudemon 200 Firewall
Baud rate 9600, Data bits 8, Parity None, Stop bits 1, and Flow control None. Click
the <OK> button to return to the HyperTerminal interface.
Figure 4-4 Setting serial interface parameters
3) Set HyperTerminal properties. Select [Property/Settings] on the HyperTerminal
and enter the property setting window, as shown in Figure 4-55. Select VT100 or
auto detection as terminal simulation type, press [Ok] and return to the
HyperTerminal window.
Chapter 4 Boot and Configuration
4-3