Chapter 3 Configuration - GE PACSystems RX3i User Manual

Chapter 3 Configuration

This chapter explains how to configure an RX3i PROFINET Controller and its IO devices in a PACSystems RX3i
controller system. Additional information about RX3i configuration is available in other PACSystems
documentation and in the Logic Developer online help.
This chapter discusses the following topics:
•
Configuration Overview
Basic Configuration Steps
o
•
Configuration Tools
•
Configuring an RX3i PROFINET Controller
The PROFINET Controller's LAN
o
Configuring PROFINET Controller Parameters
o
•
Configuring PROFINET LANs
Configuring the LAN Properties
o
•
Adding a VersaMax PROFINET Scanner to a LAN
Configuring VersaMax PNS Parameters
o
Adding VersaMax PNS Power Supplies
o
Adding VersaMax Modules to a Remote Node
o
Adding Power Supplies Between Modules
o
Configuring VersaMax Module Parameters
o
Configuring Analog Modules that have Jumpers
o
•
Adding a Third-Party IO-Device to a LAN
Editing Third-Party IO-Device Parameters
o
Configuring Sub-modules of an IO-Device
o
•
Viewing / Editing IO-Device Properties
•
Assigning IO-Device Names
•
Configuring IO-Devices
•
After the Configuration is Stored to the RX3i CPU
Clearing the RX3i Controller Configuration
o
GFK-2571N May 2018 49