Adding Versamax Modules To A Remote Node - GE PACSystems RX3i User Manual

3.7.3

Adding VersaMax Modules to a Remote Node

The PNS remote node can contain the module types listed in the VersaMax PROFINET Scanner Manual,
GFK-2721. However, it cannot contain the following expansion modules or communications modules:
Asi Network Master Module
DeviceNet Network Control Module
Expansion Transmitter Module
Expansion Receiver Module, Isolated
Expansion Receiver Module, Non-isolated
Profibus-DP Network Slave Module
To add a module to the remote node, right click on the VersaMax PNS icon in the Navigator and select Change
Module List. In the right pane of the Change Module List window, expand the list of VersaMax module types.
Select modules from the list (right pane) and drag them to available slot locations in the remote node (left
pane).
To delete a module from the left-side pane, select it and press the keyboard Delete key. When the modules in
the left side pane are correctly situated, click OK to add them to the Configuration.
GFK-2571N
Unsupported VersaMax Modules
Figure 65: Adding VersaMax I/O Modules to Remote Node
Figure 66: Select VersaMax Module from Available List
May 2018
Chapter 3. Configuration
IC200BEM104
IC200BEM103
IC200ETM001
IC200ERM001
IC200ERM002
IC200BEM002
71