Figure 88: List Of Device Names On Lan With Status Indications - GE PACSystems RX3i User Manual

Chapter 3. Configuration
Once a LAN is selected, click on Refresh Device List to display a list of actual devices on the LAN. Each device
can be in one of three conditions as indicated by the symbol in the Status column:
indicates that the Device Name, IP Address, Subnet and Gateway of the actual device matches the
configured device of the same Device Name residing on the selected LAN.
indicates that the Device Name of the actual device matches, but the IP Address, Subnet, or Gateway
does not match the configured device of the same Device Name residing on the selected LAN.
indicates that the Device Name of the actual device does not match any configured device residing on
the selected LAN. Either there is no such Device Name configured in the system, or the device with
that Device Name resides on a different LAN.

Figure 88: List of Device Names on LAN with Status Indications

If the Device Name of the device on the network is not correct, select the target device in the list of networked
devices, and click Edit Device. This will open a new dialog that can be used to set various parameters, including
Device Name, directly on the device.
Note: For the PROFINET Controller to successfully deliver configuration to a device, only the Device Name is
required to match the configuration.
82 PACSystems* RX3i & RSTi-EP PROFINET IO-Controller User Manual GFK-2571N