Save A Set; Load A Set - Sanyo POA-MD13NET2 Owner's Manual

Chapter 4 Controlling the Projector

Save a Set

1
Decide your desired PC adjustment val-
ues through the PC Adjustment pages
"1"to "2".
2
Display the page "3" and select a mode
number with the pull-down menu button
of the Save to. Type a memo into the
Memo text area for simple description of
your selected number.
3
Register by pressing the Set button.
To restore the adjustments, press the
Reset button.
It is displayed with "Stored" or "Free" for
the memo of Mode1 to Mode5. The memo
of ExMode6 to ExMode50 can be stored
into the selected mode.

Load a Set

Select a set to load with the pull-down menu button of the Load Set No. and press the Set
button. The stored setting values will be applied to the each PC adjustment item.
The Display settings can be stored up to 50 sets, 5 sets for Mode1 to Mode5 are stored into
the projector and 45 sets for ExMode6 to ExMode50 are stored into the Network Board.
36
Select a mode by
clicking the button
Type a memo for
the selected mode
Select a load mode
by clocking the but-
ton