Table of Contents
Advertisement
Control
Display the control page by clicking Multi Control sub
menu tab. The setting pages are constructed from 1 to
7 page and each item is indicated on the next page.
Load and apply the setting value
The control sets saved for each projector (
trolled projectors function is being used. Select a setting number from the item Load
Setting No. with the pull-down menu button and then click Set button. The control
values stored with selected set number for each projector will be applied to the indi-
vidual projector assigned to that set. The control values will not be applied to all of
the projectors under the multi-control.
z
If loading a set to the multiple projectors, the contents of the set must be effective to current
accessed projector. If not, the multi-control can not be performed.
Example: If the DVI computer input for INPUT1 is set into the "Set1" and the current
accessed projector has a video board on the INPUT1, the load set will become
invalid this time and the loading of set for the another projectors will not be carried
out.
p.50) can be used while the multi-con-
OWNER'S MANUAL [HD Series]
Control
59
Network Board
Advertisement
Chapters
Table of Contents
