Product Specification - Sanyo POA-MD13NET2 Owner's Manual

Product specification

Type ......................................Network Board
LAN interface........................Applicant regulation
Network protocol ..................TCP/IP specification
Serial interface ......................RS-232C
Power source ........................Supplied from the projector
Power consumption ..............3.0 watts
Dimensions (W x H x D)........5.39" x 1.18" x 4.33" (137 x 30 x 110mm)
Weight ..................................0.34 lbs (155 g)
Built-in battery ......................Lithium battery, Type CR2032, 3.0V
Operating temperature..........41˚F ~ 95 ˚F (5˚C ~ 35 ˚C)
Storage temperature ............14˚F ~ 140˚F (-10˚C ~ 60˚C)
* The specifications are subject to change without notice.
The CE Mark is a Directive conformity mark of the European Community
(EC).
Data transfer speed
data transfer mode
Terminal
Baud rate 0.3/1.2/2.4/4.8/9.6/19.2/28.8/57.6/115.2 Kbps
Flow control Hardware flow control (RTS/CTS, Xon/Xoff)
Parity check Odd/Even
Terminal D sub 9-pin Male
IEEE802.3 (10Base-T)
IEEE802.3u (100Base-TX)
10Mbps/100Mbps
Half duplex/Full Duplex
8-pin modular (RJ-45)
TCP/IP
OWNER'S MANUAL [HD Series]
Specifications
77
Network Board