How To Adjust And Select The Item; Input - Sanyo POA-MD13NET2 Owner's Manual

How to adjust and select the item

Item selection
Select your desired mode with pull-down menu button and click the Set button.
Setting value change
To change the value, take one of 2 ways below,
1) Change the value step by step by clicking the "+" or "-" button.
2) Type the value directly onto the text box and click the Set button. The number on
the text box indicates the current setting value.
* Some control items can not be used depending on the selecting input mode or functions of
the projector you use. In this case, the values of those items are indicated with "---".

Input

This function is to select the input mode and source mode of the projector.
Select the input mode with the radio button, and input source mode with
the pull-down menu button. Then set the selected input mode and source
mode by clicking Set button.
Select a input with radio
buttons.
Item
INPUT ................Displays slot no. and board
Select a source mode
with pull-down menu.
Control the projector
Description
name installed in the projector.
The setting items differ from
the actual depending on the
board function.
Network Board
OWNER'S MANUAL [HD Series]
37