Program Installation; Off-Line Startup - NEC NEAX 2400 ICS Installation Manual

1. Program Installation

Program installation procedure consists of the following steps.
When the system is in redundant configuration, perform system changeover by turning OFF the System 0 and repeat
the above steps.

1.1 Off-Line Startup

START
Set the SENS switch for
the system to be initial-
ized (CPU0, CPU1) to
"c" on the EMA card.
• Turn Power-SW ON.
END
Off-Line Startup
HD Initialization
Basic Software Installation
Standard Service Software Installation
<Status change of 7 Segment LED on the EMA card>
ND-70373 (E)
<Startup end (off-line mode)>
SYSTEM STARTUP
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
CHAPTER 3
Page 19
Revision 1.0