Ir Data Send Programming; Ir Data Send - Sharp UP-3300 Instruction Manual

IR Data Send Programming

Use the following procedure to select the menu option "17 IR DATA SEND":

IR data send

Your POS terminal can send data to another device by infrared rays.
Procedure
Program the item as follows:
• TO (Use the selective entry)
Select one of the following options to send data to another
device:
ECR (IrDA):
ECR (ASK):
ER-02FD (ASK): Selects "ASK" for the communication
• SEND DATA (Use the selective entry)
Select one of the following options (data sources):
ALL RAM
STANDARD RAM(2)
UP-P02MB2(2)
UP-P02MB2(4)
RESERVED 1
RESERVED 3
• SPEED (Use the selective entry)
Select one of the following options (data transmission
speeds):
PROGRAMMED SPEED: Sends data at a programmed
115200bps: Sends data at 115200 bps (for "IrDA" only).
57600bps: Sends data at 57600 bps.
38400bps: Sends data at 38400 bps.
19200bps: Sends data at 19200 bps.
9600bps: Sends data at 9600 bps.
4800bps: Sends data at 4800 bps.
2400bps: Sends data at 2400 bps.
Selects "IrDA" for the communication
system to communicate with another POS
terminal.
Selects "ASK" for the communication
system to communicate with another POS
terminal.
system to communicate with the ER-
02FD.
STANDARD RAM(1)
UP-P02MB2(1)
UP-P02MB2(3)
SSP
RESERVED 2
RESERVED 4
speed.
211