Table of Contents
Advertisement
Color monitor 175V
Switching the monitor on
Ê
Press the ON/OFF switch (3).
The power indicator (2) lights up green when the system unit is turned on.
If your PC has a power management function (energy-saving mode), you should read the
i
"Notes on power
Switching the monitor off
Ê
Press the ON/OFF switch (3).
The power indicator (2) is dark.
Notes on power management
If your PC has a VESA DPMS (Video Electronics Standard Association, Display Power
Management Signaling) power management function (energy-saving mode), your monitor will fully
support this function. The monitor has a four-stage power management system.
Stage
Power indicator
Function
Power
consumption
If your PC detects inactivity (no input) it sends an appropriate signal to the monitor to reduce the
power consumption. The power indicator of the monitor changes color to indicate the status change.
If there is still no input, power consumption is further reduced (OFF mode).
Once an input is made at the PC the screen contents are redrawn and full power is restored.
The length of the individual stages is determined by the power management system of the PC. For
detailed information on how energy-saving mode operates refer to the Operating Manual or
Technical Manual of your PC.
The service life of your monitor will be extended if the OFF mode is switched to after 30
i
minutes at the earliest (setting in screen saver or in your PC's BIOS setup).
When the monitor is switched to OFF mode by the power management system a power
consumption of up to 5 W is maintained to feed the circuit for redrawing the screen
contents.
To cut off power consumption totally, press the ON/OFF switch on the front of the
monitor.
10 - English
management" of the monitor in this chapter.
ON
green
Monitor
operating
normally
normal
< 100 W
Standby
Suspend mode
mode
amber
Monitor
is dark
reduced
to < 15 W
amber
Monitor
is dark
reduced
to < 10 W
A26361-K609-Z100-2-5E19
OFF mode
amber
Monitor
is dark
reduced
to < 5 W
Advertisement
Table of Contents
