Pin Assignment D-Sub (15-Pin); Error Handling - Siemens 175V Operating Manual

Pin assignment D-SUB (15-pin)

Pin
1
2 Green video input
3
4
5
6 Red video ground
7 Green video ground
8 Blue video ground

Error handling

Should an error occur, first check the following points. If the distortion is still not eliminated, the
monitor should, if possible, be checked on another PC.
If you cannot solve the problem, contact our Help Desk.
The screen display is too small or not centered
The monitor recognizes an undefined mode (see
Ê
Adjust the position and the size of the display and save your settings (see "
monitor").
Colors are impure or shifted
Ê
Degauss the monitor (see
Ê
Ensure that there are no devices or objects near the monitor which generate magnetic fields (e.
g. loudspeakers).
The screen display is flickering
Ê
Set an ergonomic refresh rate ( 75 Hz) using the PC software (see documentation for your PC
or your screen controller/graphics card).
Ê
Ensure that the monitor is kept at a distance of at least 30 cm from other monitors of the same
construction type. With different monitors, the distance must be increased, if necessary.
A26361-K609-Z100-2-5E19
10
Meaning
Red video input
Blue video input
Ground
DDC Return
"Operation of the
1
5
6
11
15
Pin
9
10
11
12
13
14
15
"Technical data").
monitor").
Color monitor 175V
Meaning
not connected
Logic ground
Ground
DDC data (SDA)
H. sync
V. sync
DDC Clock
(SCL)
Operation of the
English - 17