Functions Used For Making Calls; Making Calls; Considerations; Using The Handset - Siemens HIPATH HIPATH 1190 User Manual

Functions used for making calls

Step by step
18
Functions used for making calls

Making Calls

Considerations

• When authorized, it allows you to call external num-
1
bers on a public network.
• The HiPath 1100 can also be programmed to require
pressing the "Internal" key before an internal number
can be dialed. When this is the case, there is no
need to enter an external line access code to dial an
external number ("Automatic Seizure of an Exter-
2
nal Line Check with the Support Technician for your
system.
• Ask your Support Technician for the required internal
numbers, public network access codes as well as
information about enabled features and available ex-
tensions.
• Depending on how the HiPath 1100 is programmed
(ask the system's technical support team) it will au-
tomatically select the most economical route for
making an external call (LCR - Least Cost Routing).
When an LCR is not available, the non-default carrier
name or "EXPENSIVE CONN" appears on the dis-
play, and a warning tone is emitted.

... Using the Handset

Lift the handset.
• For an internal call: Enter an extension number
(e.g., 11/101).
For an external calls: enter the code for accessing
•
an external line (e.g., 0) and the external number you
want to call.
Wait for the call to be answered. Initiate conversation.
[1] See the chapter Important Programming Data - Classes of Service
in the Programming Manual.
[2] It allows the user to dial an external call directly, without having to
dial an external access code (e.g., 0). If a continuous dialing tone is
heard when the handset is lifted, it means that Automatic Seizure
Mode is active (see Programming na External Line - Automatic Sei-
zure of an External Line, in the Programming Manual).