Disposal Of The Packaging; Requirements For The Set-Up Location - Silvercrest KH 2600 Operating Instructions Manual

Setting up and connecting

Disposal of the packaging

The packaging protects the device from transport damage. The packaging
materials are chosen from an environmentally friendly and disposal technological
point of view and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material
and reduces generated waste. Dispose of packaging material that is no longer
needed according to the regionally established regulations.
NOTICE
► If possible preserve the device's original packaging during the warranty
period so that in the case of a warranty claim you can package the device
properly for return.

Requirements for the set-up location

For safe and fault free operation of the device, the set-up location must fulfi ll the
following conditions:
■ Place the device on a fi rm, fl at and level surface.
■ To avoid overheating maintain a free space of at least 15 cm around and
40 cm above the device.
■ Do not position the device in a dusty, hot, wet or very humid environment or
in the vicinity of fl ammable materials.
■ Protect the device from vibration.
■ The surfaces of furniture may contain components that could aff ect and
soften the rubber feet on the device. If necessary, place an anti-slip mat or
similar under the rubber feet of the device.
■ The wall socket must be easily accessible so that, in an emergency, the plug
can be quickly withdrawn from the socket.
KH 2600
GB
IE
11