Silvercrest KH 2600 Operating Instructions Manual page 18

Saving stations manually
GB
IE
Selecting a saved radio station
16
The device has 20 memory slots available for station frequencies. To save a
station frequency proceed as follows:
Press the /ALARM OFF button
to switch the device on.
Press the FUNC. button
Select a station with the ►►I button
Press the MEMORY/TIME
MEM button on the remote control. "MEMORY"
appears in the display
Press the A LARM1/ALARM2 button or the
MEM-/MEM+ button on the remote control
to select the desired memory slot between 01
and 20.
Press the MEMORY/TIME
MEM button on the remote control again to
save the reception frequency of the set station
to the selected memory slot.
NOTICE
► If no input is made within approx. 5 seconds after the MEMORY/TIME
button or the MEM button on the remote control is pressed the "MEMORY
01" indicator in the display goes out and the current station is not saved.
Press the /ALARM OFF button
button on the remote control to switch the
device on.
Press the FUNC. button
select the radio function.
Select with the A LARM1/ALARM2 buttons or
the MEM-/MEM+ buttons on the remote control
the desired memory slot for the saved station
between 01 and 20.
Handling and operation
20
or the button on the remote control
12
several times to select the radio function.
11
or the I◄◄ button
17
button or the
4
and "01" blinks.
17
button or the
20
or the
12
several times to
13
.
KH 2600