Silvercrest KH 2600 Operating Instructions Manual page 25

Handling and operation
Switching the alarm off
Snooze function ("SNOOZE" function)
Whilst the alarm is sounding press the SNOOZE
button
In the display
After 9 minutes the alarm sounds again.
(In the diagram on the right both alarm 1 and alarm 2
are programmed. The alarm 2 goes off and the symbol
blinks.)
Switching the alarm off
When the programmed time is reached the alarm continues to sound until it is
switched off .
Press the
to switch the alarm off .
Press the
►
Fast switch on/off of the alarm
Prerequisite: The device is in standby mode.
Press the ALARM1/DOWN button
device or the AL1/AL 2 button on the remote control continually until the
alarm symbol
►
KH 2600
8
to temporarily switch off the alarm.
4
appears the notice
/ALARM OFF button
button if you have activated the wake-up light function.
NOTICE
The alarm goes off again within 24 hours.
/ in the display appears/disappears.
NOTICE
The last selected alarm settings remain saved.
.
20
or the button on the remote control
18
/ALARM2/UP button
GB
16
on the
23
IE