Adjusting The Volume; Radio Operation - Silvercrest KH 2600 Operating Instructions Manual

Handling and operation

Adjusting the volume

Prerequisite: The device is switched on.
Press the
control to adjust the volume. The set volume level is shown below and to the
right in the display
NOTICE
► The set volume applies for all functions.
► The volume you have selected will also be saved automatically as the
volume for the wake function.

Radio operation

NOTICE
► For a good radio reception the wire antenna
coiled. Adjust the antenna, whilst in radio operation, to the best reception.
Switching on the radio
Press the
device on.
Press the FUNC. button
select the radio function. In the display
appears the symbol
tion frequency of the set station.
Manual station selection
Press the ►►I button
desired station gradually with each button press.
Automatic station search
Press and hold down the ►►I button
seconds. The device automatically searches for the nearest station with
sufficient reception quality.
NOTICE
► If the reception quality is especially high, in the display
stereo symbol
KH 2600
6
button or
4
.
/ALARM OFF button
button on the remote control to switch the
12
and the current recep-
11
or I◄◄ button
.
7
button on the device or on the remote
24
must be completely un-
20
or the
several times to
4
13
briefly to set the frequency of the
11
or I◄◄ button
13
for at least two
4
appears the
15
GB
IE