>
Then insert the plug of the power adapter into a mains
power socket whose voltage matches the information given
on the power adapter type plate.
Switching between power supplies
The DYNAMO/BATTERY switch d, with which you can select
different power sources, is located on the rear of the device.
>
Place this switch in the position DYNAMO to power the
device from the built-in Ni-MH batteries.
>
Place this switch in the position BATTERY to power the
device from the batteries in the battery compartment.
>
Power provision from a mains power adapter functions in
both switch positions.
Charging the batteries
Should the device functions diminish whilst it is being powerered
from the built-in Ni-MH batteries, it means they are drained.
>
In this case, fold out the lever of the dynamo crank
then turn the dynamo any direction until the functions are
restored.
>
During the period that the batteries are being charged, the
CHARGE indicator r lights up.
>
When done, place the dynamo crank
position.
f back into its rest
- 9 -
f and