Cleaning And Storing; Disposal; Troubleshooting - Silvercrest SSB 50 A1 Operating Instructions Manual

5. Now play a song on the audio device. The sound is
played back from the soundbar.
6. With the I 28,
can select and control the music tracks.
Interruption of the connection
The connection is interrupted if
... one of the devices is switched off;
®
... the Bluetooth function is switched off;
... the range (approx. 10 metres) is exceeded;
... you press the PAIR 19 button until the display 1
shows bt flashing rapidly. In this case, a new con-
nection to another device can be established imme-
diately.

7. Cleaning and storing

DANGER! Risk of electric shock!
Pull the power unit 11 out of the wall socket before
you clean the device. Make sure that no liquid gets
into the device.
• Clean the device with a slightly damp cloth. In case of
persistent contamination, you can also use a slightly
more gentle cleaner such as detergent. Solvents, spir-
its, thinners etc. must not be used, as they can damage
the surface of the device.
• When not using the device, store it in a place where
neither high temperatures nor moisture can affect it.
Remove the battery from the remote control.

8. Disposal

This product is subject to the provisions of Eu-
ropean Directive 2012/19/EC. The symbol
showing a wheelie bin crossed through indi-
cates that the product requires separate refuse
collection in the European Union. This applies
to the product and all accessories marked
with this symbol. Products identified with this
symbol may not be discarded with normal
household waste, but must be taken to a col-
lection point for recycling electric and elec-
tronic appliances. Recycling helps to reduce the
consumption of raw materials and protect the environment.
Batteries must not be discarded with your
household waste. Spent batteries must be dis-
posed of properly. Special containers are
available for this purpose in shops selling
batteries and at municipal collection points.
(Rechargeable) batteries marked with the following letters
contain harmful substances such as: Cd (cadmium), Hg
(mercury), Pb (lead).
Packaging
When disposing of the packaging, make sure you comply
with the environmental regulations applicable in your
country.
8
GB
I 20 and /II 21 buttons you

9. Troubleshooting

If your soundbar fails to function as required, please try this
checklist first. Perhaps there is only a minor problem, and
you can solve it yourself.
DANGER! Risk of electric shock!
Do not attempt to repair the device yourself under any
circumstances.
Fault Possible causes / Action
• Has the device been connected to
the power supply? Is the display 1
showing – –?
• In the case of a connection to the
HDMI ARC 10 socket, the HDMI
cable as well as the connected de-
vice (e.g. a television set) must also
be ARC-enabled. If your television
set is not provided with an ARC-ena-
No function
bled HDMI connection, switch to a
different type of connection or re-
place the television set.
• Replace the old HDMI cable with a
new, ARC-enabled cable.
• Has the correct audio signal been se-
lected at the audio device (e.g. tele-
vision set)? Select PCM 2.0 (or PCM
stereo) as the audio output.
• Is the Bluetooth
dio device active?
• Did you switch off the device?
® • Does a Bluetooth
No Bluetooth
other device exist? Press the PAIR 19
connection
button until the display 1 shows bt
flashing rapidly, and create the new
connection.
• Is the volume set too low on the au-
dio device?
No music play- • Have you selected the correct con-
back nection?
• Is the volume too low or switched
off?
• In the case of any possibly occurring
interferences, remove, if necessary,
Interferences
any mobile phones, tablets or other
during opera-
devices with radio wave operation
tion
located in the vicinity of the sound-
bar.
• This device has an automatic shut-
down mechanism to save energy.
Soundbar This device automatically switches to
switches itself standby mode if either no signal or
off only a very weak signal is received
for approx. 20 minutes, and the con-
trols have not been used.
®
function of the au-
®
connection to an-