Storing And Selecting Stations; Stereo/Mono Reception; Playing Back Cds And Usb Storage Media; Notes On The Media - Silvercrest SPSS 125 A1 Operating Instructions Manual

15.2. Storing and selecting stations

15.2.1. Storing stations automatically
 Press and hold the SCAN button on the device until the station search starts automat-
ically. All the stations found by the search are now stored automatically, one after the
other.
15.2.2. Storing a station manually
 Tune in a station that you would like to store.
 Press the MEM button. The programme position (e.g. P01) flashes in the display.
 While the display is flashing, use the M-/+ buttons to select the desired programme
position for this station.
 Then press the MEM button again to store the station.
15.2.3. Selecting stations
 Use the M./ buttons on the remote control or M-/M+ on the device to select
the desired station. The programme position (e.g. P01) appears in the display.

15.3. Stereo/mono reception

If the stereo reception is weak (there is noise interference), the reception signal can some-
times be improved by switching to mono reception.
 Press the MO/ST button to switch between stereo and mono reception.

16. Playing back CDs and USB storage media

 Press the SOURCE button once or several times until you see CD or USB on the dis-
play depending on the desired operating mode.
The description in the following section refers to CD and USB playback unless otherwise
stated.

16.1. Notes on the media

Note the following:
• Due to the numerous different file systems and file formats, connected USB memory
sticks cannot be guaranteed to function.
• Depending on the size of the data medium, it may take some time for the system to be
detected.
• Supported file systems are FAT16 and FAT32. The supported file format is MP3.
• Depending on the medium, certain functions may not be supported. For example, on
an audio CD you might not be able to select a folder or the track information.
• External hard disks are not supported.
24 - English