Vertical Adjust Handle; Insert Or Remove Grids - GE Optima XR646 Operator's Manual

Vertical Adjust Handle

1. Grasp the handle and depress the inner switch
2. Move the arm up or down.
3. Release the switch when the desired height is reached.
Figure 8-34 Vertical adjust handle

Insert or Remove Grids

Refer to Grids(p. 8-68)
You have the choice of acquiring images with or without the grid. Grid exams require inserting the proper
grid. Grids are stored in the wall mounted accessories holder.
CAUTION Grid handling:
use. Dropping the grid could cause damage and reduced image quality.
To remove the grid, use the handle to pull the grid out of the wallstand or accessories holder. To insert it,
slide the grid through the groove at the lateral side of the wallstand until it rests completely in the slot. An
interlock within the receptor senses the new grid.
5495975-1EN Rev.9
© 2013-2017 General Electric Company. All rights reserved.
for more information about available grids and grid accessories.
Handle grids with care and place in accessories holder when not in
Chapter 8: System Hardware Overview
(Figure 8-34).
8-47